Shop by
Don't let the Warm Air kid
you. Gear up on winterizing
your dwellings

Masonry Drive Pin Anchor
Masonry Drive Pin Anchor
Please Note: We try very hard to present accurate product images, but product changes occur constantly. All images should be considered approximations. If a particular product feature, color or characteristic is especially important, please call us to verify that information before placing your order. Thank you.
E-mail this product to a friend

5/8 x 6 In Drive Pin Anchor

 


  • Drive pin expansion anchor for medium and heavy duty fastening applications into concrete and grout filled block
  • Integrated nut and washer helps keep track of parts


Easy to follow Installation instructions:
  1. Drill a hole in the base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified embedment depth plus 1/4 In to allow for pin extension and blow it clean using compressed air. Overhead installations need not be blown clean. Alternatively, drill the hole deep enough to accommodate embedment depth and dust from drilling.
  2. Adjust the nut for required embedment. Place the anchor through the fixture and into the hole.
  3. Hammer the center pin until the bottom of the head is flush with top of anchor.
  • Note: Hole in fixture to be mounted must be at least 1/16 In greater than the anchor diameter. 
  • Caution: Oversized holes in the base material will make it difficult to set the anchor and will reduce the anchor's load capacity.

Stocking Data is current as of 12/4/2024 6:45:01 PM CT

Cox Part Number (SKU):
DPA58.6
Brand:
Simpson Strong Tie
Manufacturer Part No:
EZAC62600
Item UPC:
031916410218
Ship Weight:
0.0000
Sold By:
EA
Case Quantity:
15
Qty Available:
0(Out Of Stock)
Qty On-Order:
0

Save with Quantity Pricing:
1- 19
$7.060
20+
$6.001
  Up